SA-01

 



Dodatne informacije

Models: SA-01
Product: External Lever & Springs
Description: Provides additional external force to anticipate closure in applications where rapid media flow reversal requires the valve to close faster than standard.
Applications: Pump protection when pumping in parallel into a common header.











Detaljnije »

SA-40

 


Dodatne informacije

Models: SA-40

Product: External Lever & Compression Springs

Description: Provides additional force to anticipate valve closure, using an enclosed compression spring, in applications where rapid media flow reversal requires the valve to close faster than standard.

Applications: Pump protection when pumping in parallel into a common header, where spring force required is higher than a SA-01 or if an enclosed spring is preferred.






Detaljnije »

SA-16

 


Dodatne informacije

Models: SA-16
Product: External Lever & Weight
Description: Provides additional external mass to increase the cracking pressure (pressure required to open the disc) and increase the closing force of the moving disc.
Applications: Where increased cracking pressure is required. Wastewater service or where suspended solids are present in the process (the weight will insure inertia induced positive closure). Relief valve with adjustable cracking pressure.








Detaljnije »

SA-1

 


Dodatne informacije

Models: SA1
Product: External Lever, Spring & Weight
Description: These units use the combination of a weight and spring to add cracking pressure and closing force to the disc.
Applications: Where performing both functions of faster closure and solid handling are required, primarily in waste water.












Detaljnije »

SA-10

 


Dodatne informacije

Models: SA-10

Product: Dual Weights

Description: Two opposing weights, one to adjust cracking pressure and one to counter balance the disc.

Applications: Insures valve is fully open on very low flows.



Detaljnije »

H-100, SA-50

 


Dodatne informacije

Models: H-100
SA-50
Product: Hydraulic Pneumatic Speed Controls
Description: Slow the opening of the valve to protect the disc assembly in the last few degrees of travel. These units offer adjustable speed control and are ideal in fluctuating flow applications. The H-100 uses the SA-01 spring. The SA-50 uses the
SA-40 compression spring.


Detaljnije »

SA-2

 


Dodatne informacije

Models: SA-2
Product: Limit Switch
Description: Provides remote indication of valve position and a positive indication of flow. If two are installed the first shows the closed position, the second the fully opened valve. (A partially opened valve is subject to premature wear.)
Applications: Automated control systems.










Detaljnije »

PEZ SA-4AX

 


Dodatne informacije

Models: PEZ SA-4AX
Product: PVC
Description: PVC Body with passivated stainless steel or titanium internals and position indication lever. Eliminates internal body corrosion.
Applications: Used for salt water, marine life support systems and desalination applications.




Detaljnije »

Reference:

   

Odaberite nas jer:

Mi smo familija. Mi smo eksperti. Mi smo posvećeni vama

Drugačija kompanija koja podiže standarde!

Nudimo Vam:

Kontakt:

Adresa::Dimitrija Tucovića 40 Vršac
Telefon: +381 13 832 342
Mobilni tel.: +381 66 943 6252
E-mail: office@industrialalliance.rs